When you’re tearing down a building, then it takes certain precautions and procedures to follow, and protect the environment, the people who live around it. Here a legal and professional demolition abatement comes to the rescue.
If you’re a Canadian looking for demolition abatement services in Kelowna. This comprehensive article will provide a complete guide to demolition abatement- what it is, why you might need it, and what are conditions to get demolition permit in Kelowna.
So whether you’re starting a construction project from scratch or just making some much-needed repairs, read all the information you need to ensure the process goes as smoothly as possible!
What is Demolition Abatement?
Demolition is a name for destroying any structure after its considerable service life by controlled methods. For a successful abatement, detailed surveys and evaluations are required to demolish any building. The necessary surveys include;
- Building surveys
- Structural survey
For demolition approval, the demolition plan is prepared based on a building survey. The plan is then submitted to the local authority and application for demolition approval. The demolition plan includes;
- Land showing the location of the building
- Height of building
- Structural systems
- Extent of damage
- Detail of structures around the building height
- Layout plan
- The proposed method of demolition
- Safety measures
The demolition abatement can be a complex and time-consuming process, so it is important to plan and ensure that all demolition abatement Kelowna regulations are met.
There are several reasons why demolition abatement is important.
Why is Demolition Abatement Required?
Because, it protects the environment from potentially harmful materials that could be released into the air or ground during demolition. Also,itprotects workers who may be exposed to these materials during demolition process.
Another reason why demolition abatement is highly required is, it can reduce the amount of noise and dust generated during demolition.
Besides, if you’re looking to remove asbestos or other hazardous materials from your property, then you should consult an environment consultant in Kelownawho specialize in demolition abatement.
You should also consider the importance of safe working practices when performing demolition.
Methods of Demolition Abatement
Many different methods can be used for demolition abatement;
Hazmat survey before demolition begins – This survey will identify any potentially hazardous materials present on the demolition site. Once these materials have been placed, they can be removed or contained so that they won’t pose a risk to the environment or workers during demolition.
Using special containment systems during demolition – These systems can be used to collect and contain any hazardous materials generated during demolition. These systems can also be used for reducing amount of noise and dust that is generated during demolition.
Once demolition is complete, it is important to clean up the demolition site properly. This includes removing any hazardous materials on the site before demolition begins. It’s a must to remove any debris that was generated during demolition.
This debris can include demolition waste, dust, and rubble. Proper cleanup of the demolition site will help to ensure that the place is safe for future use.
How to Get a Demolition Permit in Kelowna?
To apply for a demolition permit in Kelowna, you must fill out the application. You may apply as the property owner, a contractor, or use a licensed expeditor. You must submit a separate application for each structure you wish to remove.
However, private garages that are less than five cars in number may be destroyed on the same demolition permit as the associated residential building. For more information, visit the City’s website.
The demolition permit is valid for two years and ten months. After that, the applicant can start demolition, but not until the Environmental Consultant KelownaAssessment is finished. The property’s owners will need to complete an environmental assessment to determine whether the project is compatible with the environment and would not affect the surrounding area.
The property owners must also apply for a heritage alteration permit if the site is Abbott Street Heritage Conservation District, where the oldest homes in Kelowna were built. The City will assess the site’s conservation value and make recommendations if the demolition goes ahead. The permit fee for a demolition permit in Kelowna is $200.
If the project is complex, the contractor must complete progress inspections. A fee for these inspections is charged at the time of permit. Typically, progress inspections are required after the contractor has completed all demolition work and graded the site.
Occasionally, additional inspections will be required by the Department of Buildings. As per the Construction & Demolition Debris Recycling Ordinance, it is necessary to submit compliance paperwork to the Buildings Department.
Who is the Best Source to Hire for Demolition Abatement in Kelowna?
If you plan a demolition project, it is important to ensure that all demolition abatement Kelowna regulations are met. This will help protect the environment and workers from potentially hazardous materials. And, it further ensures that the demolition site is safe for future use.
As far as approaching the best source to hire is concerned, then Mission Hills Environment is known to be the best environment consultant in Kelowna and is specially geared to provide services like; Asbestos Testing Kelowna& removal, demolition abatement, and removal of hazardous substances from construction sites.